High-Performance 15kv Transformer Cutout Fuse Switch for 200 AMP Systems

• Customization: Available
• Breaking Capacity: High
• Type: Current Fuse
• Model NO.: HYNC
• Usage: High Voltage
• Shape: Dropout
• Fusing Speed: K
• Fusing Device: Fuse Element
• Rated Voltage: 15kv
• Transport Package: Carton&Pallet or Wooden Case
• Specification: 100A/200A
• Trademark: YN
• Origin: China
• HS Code: 85351000
• Production Capacity: 250000PCS/Year
• Package Size: 52.00cm * 40.00cm * 15.00cm
• Package Gross Weight: 6.000kg

Product Description

Product Description

Transformer Cut Out Fuse 15kV 200 Amp 

Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device. To be connected with incoming feeder of distribution transformer or distribution lines, it mainly protect transformer or lines from short circuit and overload, and on/off loading, current. Drop-out fuse cutout is composed of insulate insulator supports and fuse tube, static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube. Fuse tube is composed of inside arc-extinguishing tube. Outer phenolic compound paper tube or epoxy glass tube, load switching fuse cutout provides enforced elastic auxiliary contacts and arc-extinguishing enclosure switching on-off loading current.
At normally working via fuse link tightened the fuse tube is fixed to form up of close position. In case system occur faults, fault current result result in fuse melt immediately and take piece electric are, which let arc-extinguishing tube being heated and explode a lot of gas, This will produce high pressure and below of the are along with tube. After fuse link melt moving contact has no tightened strength again, mechanism is locked and fuse tube drop out, Cutout now is in open position. When it needs to switch off during cutout loading, operator shall via insulating operating bar pull the moving contact, at its beginning main contact and auxiliary static contact is contacted still, Whiling pulling the auxiliary contact is separated between auxiliary contacts there occur electric arc and the arc will be lengthened in arc-extinguishing enclosure gap and meanwhile arc-extinguishing explode gas to blow off the arc during current passing zero.

Birdproof-design higher insulation characteristics insulator.
High interrupting capacity bone fiber lined fiberglass with UV-resistant finish fuse tube for long life. 
High conductivity silver plated contacts 
Attachment hooks for loadbuster tool.
Corrosion resistance cast bronze hinge. 
Tin plated parallel groove connectors for copper or aluminum conductor
Upper contacts silver-to-silver stainless steel. 
Fuse tube is interchangeable with other manufacturers
Heavy duty construction for long and trouble free performance. 
Heavy galvanlzed steel brackets.
According to ANSI/IEC specification
 

Technical Specification

 

Type	Rated voltage (KV)	Rated current (A)	Breaking current (A)	Impulse voltage (BIL)	Power frequency withstand voltage	Leakage distance (MM)
HYNC1-15/100	15kV-24kV	100	8000	125	45	485
HYNC1-15/200	15kV-24kV	200	10000	125	45	485

 

Main Product

Company Profile

 

FAQ

Q: Are you manufacturer or a trade company?
We are a true professional manufacturer more than 15 years in China. 

Q: Where is your factory?
Our factory address is Room 101, Building 2, No. 28, Binhainansan Road, Yueqing Economic Development Zone, Yueqing City, Wenzhou City, Zhejiang Province, China.

Q: Can I produce fuse cutouts according to my own requirements?
Surely, OEM & ODEM is welcome.

Q: May I get a fused cutout sample to check firstly?
Yes, the sample fee and courier fee need be paid by your esteem company, we will return cost back to you within your first order.

Q: How about sample time?
Normally, it can be ready in one week.

Q: What's your MOQ and delivery time?
For cutout, its MOQ should be 100pcs, delivery time is 25 days.

Q: Do you have type test report for ad drop out fuse cutout?
Yes, but consider test fee is very high, we make test on some models, welcome to contact to know details.

Q: What is your payment term?
Our payment term is T/T, L/C, if you have other idea, let us discuss.

Q: What is package for fuse cutout?
For porcelain and polymer fuse cutout, we will pack by carton+ pallet packing.

Q: What is standard of your cutouts?
IEC 60282-2, IEEE/ANSI C37.41, IEEE/ANSI C37.42